CORC  > 金属研究所  > 中国科学院金属研究所  > 期刊论文
General relationship between strength and hardness
P. Zhang ; S. X. Li ; Z. F. Zhang
刊名materials science and engineering a-structural materials properties microstructure and processing
2011
卷号529页码:62-73
关键词Crystalline materials Bulk metallic glasses Ceramics Strength Hardness Yield criterion Indentation bulk metallic-glass high-pressure torsion mechanical-properties brittle transition 4000 mpa indentation alloys deformation composites evolution
中文摘要both hardness and strength are the important properties of materials, and they often obey the three times empirical relationship in work-hardened metals and some bulk metallic glasses (bmgs). but the relationships between strength and hardness are quite different for those coarse-grained (cg) and ultrafine-grained materials, brittle bmgs and ceramics. in the present work, some cu alloys with different microstructures, zr-, co-based bmgs and al(2)o(3) were employed to analyze the general relationship between hardness and strength. several different relationships could be gotten from the experimental results of different materials available, and three types of indentation morphologies were observed. indentation with "sink-in" morphology always represents a state of material and one third of hardness is in the range from yield strength to ultimate tensile strength. the other two indentation morphologies induced the fully hardening of material, so hardness could represent the intrinsic mechanical property of materials. the ratios of hardness to strength are found to be affected by the piled-up behaviors and their ability of shear deformation. combined effect of the two aspects makes hardness approximately be three times of strength in the work-hardened crystalline materials and the shearable bmgs, but higher than three times of strength in the brittle-, annealed bmgs and ceramics. (c) 2011 elsevier b.v. all rights reserved.
原文出处<go to isi>://wos:000297391700009
内容类型期刊论文
源URL[http://210.72.142.130/handle/321006/30895]  
专题金属研究所_中国科学院金属研究所_中国科学院金属研究所_期刊论文
推荐引用方式
GB/T 7714
P. Zhang,S. X. Li,Z. F. Zhang. General relationship between strength and hardness[J]. materials science and engineering a-structural materials properties microstructure and processing,2011,529:62-73.
APA P. Zhang,&Z. F. Zhang.(2011).General relationship between strength and hardness.materials science and engineering a-structural materials properties microstructure and processing,529,62-73.
MLA P. Zhang,et al."General relationship between strength and hardness".materials science and engineering a-structural materials properties microstructure and processing 529(2011):62-73.
个性服务
推荐该条目
保存到收藏夹
查看访问统计
导出为Endnote文件
相关权益政策
暂无数据
收藏/分享
所有评论 (0)
暂无评论
 

除非特别说明,本系统中所有内容都受版权保护,并保留所有权利。

 

©版权所有 ©2017 CSpace - Powered by CSpace